I'm redoing my panel and want it to look like the current factory models. Does anyone know the hole size required for the round rocker switches, or where I can find a spec sheet? I see them listed in the Kitfox parts catalog but no specifics.
I'm redoing my panel and want it to look like the current factory models. Does anyone know the hole size required for the round rocker switches, or where I can find a spec sheet? I see them listed in the Kitfox parts catalog but no specifics.
The round ones that came in my fwf kit are 3/4''. I bought some that I thought were the same but they are 13/16''. I didn't know that most of the ones you need came with the fwf kit.
Harlan and Susan Payne
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop.
https://www.youtube.com/@KitfoxPilot/videos
Bill - a considerable number of the switches offered by Digikey (for example: https://www.digikey.com/en/products/...A802BB/2349682) and Mouser (for example: https://www.mouser.com/ProductDetail...rVpPKIug%3D%3D) offer data sheets.
See my build log at:http://www.mykitlog.com/lowandslow/