Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 6 of 6

Thread: Model 4 Door latch question

  1. #1

    Join Date
    Aug 2020
    Location
    Richmond VA
    Posts
    31

    Default Model 4 Door latch question

    I'm putting the doors on the model 4 kit I'm working on and the door latch hardware doesn't look much like what's in the instructions. I'm assuming I have the hardware for a dual latch and the instructions for a single ( I have 4 push pull tubes and a bell crank). Does anyone have the instructions for the setup I have handy? Or even some pictures of how this is supposed to go together? Thanks !

  2. #2
    Senior Member PapuaPilot's Avatar
    Join Date
    Nov 2013
    Location
    Nampa, Idaho
    Posts
    1,227

    Default Re: Model 4 Door latch question

    How about picture of the parts you have.
    Phil Nelson
    A&P-IA, Maintenance Instructor
    KF 5 Outback, Cont. IO-240
    Flying since 2016

  3. #3

    Join Date
    Aug 2020
    Location
    Richmond VA
    Posts
    31

    Default Re: Model 4 Door latch question

    Thanks for the reply! Here's what i got
    1621091872784870046565561376901.jpg

  4. #4

    Join Date
    Oct 2011
    Location
    Waynesville ,Ohio
    Posts
    8

    Default Re: Model 4 Door latch question

    Attached are the Skystar instructions for thr double pin door latch.
    Attached Images Attached Images

  5. #5

    Join Date
    Aug 2020
    Location
    Richmond VA
    Posts
    31

    Default Re: Model 4 Door latch question

    Awesome! Thanks so much for posting those.

  6. #6

    Join Date
    Oct 2011
    Location
    Waynesville ,Ohio
    Posts
    8

    Default Re: Model 4 Door latch question

    Added missing page 2dbl pin page2.jpg

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •