Fuel line routing ss7

[Delta Whisky]

I used one more step then Eddie did. I used coat hanger wire to get the form shape and length, then used a tubing bender to get everything just right, then I decided on a better route and redid it all again. (There's a lesson in there somewhere.)

[Kitfox Pilot]

Hoping to use your guys wisdom to save a couple redo steps that I normally do. Haha

[Meyer]

I ran mine up the center. Have seen both ways.

You have to be close!!! I need to fly your way sometime.

[Kitfox Pilot]

Yes come on down and inspect for me!