I used one more step then Eddie did. I used coat hanger wire to get the form shape and length, then used a tubing bender to get everything just right, then I decided on a better route and redid it all again. (There's a lesson in there somewhere.)
I used one more step then Eddie did. I used coat hanger wire to get the form shape and length, then used a tubing bender to get everything just right, then I decided on a better route and redid it all again. (There's a lesson in there somewhere.)
See my build log at:http://www.mykitlog.com/lowandslow/
Hoping to use your guys wisdom to save a couple redo steps that I normally do. Haha
Harlan and Susan Payne
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop.
https://www.youtube.com/@KitfoxPilot/videos
I ran mine up the center. Have seen both ways.
You have to be close!!! I need to fly your way sometime.
Flying SS7, G3X, 912iS
https://mountainfoxbuild.wordpress.com/
Yes come on down and inspect for me!
Harlan and Susan Payne
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop.
https://www.youtube.com/@KitfoxPilot/videos