Trim sensor install instructions
Hi All,
Looking for a little help. I got out the instructions for the trim sensor install to go over them, but it looks like they have gotten inadvertently thrown away. Does anyone else have a copy of these they would be able to share.
Thanks for you help.
Todd
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop
Re: Trim sensor install instructions
This is the instruction sheet that came with mine, ordered about six months ago.
Trim Position Sensor Installation.pdf
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
Re: Trim sensor install instructions
That's perfect. Thanks Eric
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop
Re: Trim sensor install instructions
I was hoping someone can confirm what's on each wire...
Eric's attachment shows...
Blu/Wht = Pin 1
Org/Wht = Pin 3
White = sweeper
I'm assuming that translates to...
Blue/Wht = 5V
Org/Wht = Gnd
White = position
I just haven't been able to confirm this anywhere. Thanks
Mike Davis
Fairbanks, AK
Kitfox Series 7 SS (received kit on 18 April 2023) N967MD reserved
Rotax 916iS received, still waiting on MTV-6-R propeller
Build log - https://n967md.dcsol.com
Murphy Moose #195 (sold)
1968 C150H still flying regularly
Quicksilver MX built and registered as experimental (destroyed in wind storm)
Re: Trim sensor install instructions
Yeah, the factory instructions are pretty terrible but that's how I read it too.
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
Re: Trim sensor install instructions
Thanks Eric, I went ahead and hooked it up like that and it is working fine.
Mike Davis
Fairbanks, AK
Kitfox Series 7 SS (received kit on 18 April 2023) N967MD reserved
Rotax 916iS received, still waiting on MTV-6-R propeller
Build log - https://n967md.dcsol.com
Murphy Moose #195 (sold)
1968 C150H still flying regularly
Quicksilver MX built and registered as experimental (destroyed in wind storm)
Posting Permissions
Reply With Quote