Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Kitfox 5 Bungees

  1. #1
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Kitfox 5 Bungees

    Hi all, has anyone measurements from the original Bungees of a model 5


    Gesendet von iPhone mit Tapatalk

  2. #2
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    868

    Default Re: Kitfox 5 Bungees

    I'm away from home at the moment but if you can wait until tomorrow afternoon (US Pacific time), I have an unused set of bungees that I can measure.
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings

  3. #3
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: Kitfox 5 Bungees

    Sure thing!!

    No hurry, thank you


    Gesendet von iPhone mit Tapatalk

  4. #4
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    868

    Default Re: Kitfox 5 Bungees

    OK, sorry for the wait. I measured both, and they're within 1/8" (3 mm) of one other. Length from end to end is 80.5 inches (2.045 m). Measuring the loops from center to center is about 1.25 inches (32 mm) less. The bungees are 7/16 inch (11 mm) in diameter. I hope that's the info you need; if I can measure any other part of them for you, let me know.
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings

  5. #5
    Phantomas63's Avatar
    Join Date
    Jan 2018
    Location
    Mengen, Germany
    Posts
    1

    Post Re: Kitfox 5 Bungees

    Back on the forum now. Thank's Marc for asking.
    And thank you Eric for the measurement. Helps a lot .

    BR, Andreas
    Last edited by Phantomas63; 04-12-2021 at 02:31 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •