Just getting ready to do the butt rib install. First question is how to orient the rib. The capstrip is wider on one side than the other. Seems to me I read somewhere that if you installed the butt rib so the wide side pointed inboard, you had more support when you attached the windshield. That right or wrong. I know what the directions say but thought this was one of those mods found by those building before me.

Second question pertains to the 1/16th spacer between the butt rib and rib 1 when using Oratex. Have those of you covering with Oratex found that the 1/16th spacer was about right or wished you had a bit more space when it came time to cover.

Thanks ahead of time.

G