Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Page 11 of 11 FirstFirst ... 7891011
Results 101 to 102 of 102

Thread: Geek's STi Build

  1. #101

    Join Date
    Nov 2019
    Leavenworth WA

    Default Re: Geek's STi Build

    Quote Originally Posted by jrevens View Post
    You did well. In this kind of situation you use thin or thick washers, as necessary.
    Quote Originally Posted by alexM View Post
    As John said, you'll find many places on this build where you use a combination of -10 and -10L washers to make things fit just right.

    Thanks John and Alex. I know I certainly didn't like the look of bent mounts and such. I am just getting started on the fuselage so this was a good press to test on how to approach the rest of it all.

    Gary (Geek) Phenning
    Leavenworth (Not the Prison), WA
    Kitfox STi in Building Stage

  2. #102
    Senior Member PapuaPilot's Avatar
    Join Date
    Nov 2013
    Nampa, Idaho

    Default Re: Geek's STi Build

    I used some 10L washers on the rudder hinges so that I didn't end up bending the tabs. Yes, there are a lot of places you can use washers to space and shim up things.
    Phil Nelson
    A&P-IA, Maintenance Instructor
    KF 5 Outback, Cont. IO-240
    Flying since 2016

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts