Geek's STi Build

[Geek]

I didn't. I got the pre-rigged wings and set the 1 rib stack at the 35 1/2 inches from the 3rd rib. Reading the directions it didn't look like I needed to set the wings on till after the 1 rib stack to check the rigging again and set up the butt rib. Am I setting myself up for a problem?

G

[Shadowrider]

Apparently they have not updated their instructions......frustrating!! Hopefully you can fit your wings onto the fuselage because if the spars got moved at all they will not fit. What you don't realize is there is a slight amount of flex in the spar. I would test fit your wings to make sure they fit. If you have not done the other side, I would have the wings on the fuselage before gluing the 1 rib in place. On my brothers we had to surgically remove the 1 rib on one wing. The other wing was fine.

[Geek]

Well I guess I know what I will be doing today. I have not done the other side so there is the good news there. If the wing flexed and doesn't fit I don't think frustrating is the word I might choose. Might be coming back to you on some recommended 'surgery' suggestions.

[Shadowrider]

Fingers crossed!!! If not I can let you know what we did to remove the #1 Rib.

[Geek]

Good news! The ruler said that the spar had not flexed but being a firm believer in "Trust but verify", the wife and I went out and hung the left wing. Fit just like it was supposed to. But now as I start on fitting the 1 rib stack to the right wing, I am making the plans in my head that will allow me to final assemble that one while hung. Not sure why your brother's spars flexed and yours (and thankfully mine) didn't but I sure as heck am not going to take this opportunity to Hysol the assembly up with the wing not hung and find out.

Dustin I really appreciate you jumping in like you did. Even if it could have been bad news. If you see me doing something wrong or have a better idea of how to do it (cause you did do a kind of OK job on your plane. Just kinda though (joking for certain!!)) please feel free to jump in.

Gary

[Shadowrider]

That’s great news! I think my brothers rib was a little too tight so when he slid it on it pulled just ever so slightly enough to cause it to flex and not fit. Didn’t realize it until it was glued in place. It was some serious brain damage to fix so I am happy for you that you don’t have to go through that. Good job and keep moving forward!

[Geek]

Took Dustin's inputs to heart and got ready to do the rib 1 stack on the right wing. Figured I may have ducked the bullet on the left one and wasn't going to take the chance of learning the hard way. So I spent yesterday coming up with the supports required to hang one wing without the whole thing tipping over. Made two stands, notched the ribs of the stack for attachment and today, hung the right wing on the fuselage and Hysol'd in the first rib of the stack. I'll sleep better tonight I think knowing the spars are flexed and it fits up.

Right Wing Attached.jpgRight Wing Attach 2.jpgRight Rib1.jpgRight Rib 1 B.jpg