Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: AVMap EngiBox Issues

  1. #1
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default AVMap EngiBox Issues

    Hi all,
    I‘m having trouble with my AVMap EngiBox.

    The RPM shows normal up to 5000Rpm, if I go higher, the readings are going up line crazy 6000 plus.

    I already have installed a 330Ohm resistor, it git better, since the craziness started at 4000Rpm before.

    Anyone any ideas on how to fix this?

    Greets from Germany,
    Tuna


    Gesendet von iPhone mit Tapatalk

  2. #2
    Senior Member Delta Whisky's Avatar
    Join Date
    Dec 2017
    Location
    Amissville, VA
    Posts
    637

    Default Re: AVMap EngiBox Issues

    Apparently the issue is pretty common - I have a different EIS but a 10K Ohm, 1/4 Watt resistor was the solution.

  3. #3
    Spook712's Avatar
    Join Date
    Sep 2009
    Location
    Noervenich, Germany
    Posts
    139

    Default Re: AVMap EngiBox Issues

    Quote Originally Posted by Delta Whisky View Post
    Apparently the issue is pretty common - I have a different EIS but a 10K Ohm, 1/4 Watt resistor was the solution.
    Whow, that is way more than AVMap says, I‘ll try it out


    Gesendet von iPhone mit Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •