This shows armature replacement.
https://youtu.be/3fygCCkOA9M
This shows armature replacement.
https://youtu.be/3fygCCkOA9M
Doug
Super Sport
912ULS
Constant Speed IVOProp
Great, I appreciate that.
It would be great if there was a vid, or even some pics that showed the rebuild of the gear set too. I bought a used prop with IFA recently and I had IVO rebuild motor, The guys at IVO were great about getting in done quickly. I hope that it last longer than what many have written about in several posts. I am just trying to prepare for the inevitable of rebuilding the motor, armature and gear set.
I am especially curious about the idea of being able to rebuild the motor or gears without removing the prop.
Charlie
rc300xs made his last post in this forum on 2/10/22. You might have better luck getting an answer if you send him an email. Click his username on one of his posts above, then click "Send email."
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings