I tape my elevator gap. I want to replace the tape but I have some residual tape glue. What's the best way to remove that without damaging the fabric/polytone paint?
I tape my elevator gap. I want to replace the tape but I have some residual tape glue. What's the best way to remove that without damaging the fabric/polytone paint?
Did you try C-2210 solvent from polyfiber. I use it gently on belly staining cleaning and have had good luck with it. You still won't be able to rub real hard or you'll see paint on your rag. Bruce N199CL
Completed my Classic 4, May 2003. It had std wings. speedster tail.
912 UL Rotax. Sold to a person in Spain.
Completed a Skybolt December 2018
This stuff is supposed to be safe for use on automotive paints for removing sticker residue. I would carefully test it, but if it works it's probably safer than a solvent that is known to melt Poly-Tone.
https://googone.com/automotive-spray-gel
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
This is what I was using during the building and painting of the Skybolt.
All the fabric was coated with PolyFiber and PolyTone top coat.
M600,
The product is a good cleaner but mild on surfaces.
I had no issues. I didn't leave it dwell on the paint too long.
Completed my Classic 4, May 2003. It had std wings. speedster tail.
912 UL Rotax. Sold to a person in Spain.
Completed a Skybolt December 2018