Here it is, I think the final mod for this year, straight from the super secret Utah Skunk Works department. It is a 6.00x6 Nosewheel providing 11" of prop ground clearance (warp drive 3 blade 68"). The mains are 8.00x6. To the best of my knowledge this is the first and only Kitfox with a 6.00x6 nosewheel. I've tested it taking off and landing on pavement, grass and dirt. It is wonderful. 18 lbs air pressure seems to be about right with enough cushion and enough firmness to roll nicely over rocks and holes. I test flew it today and I don't think I have lost any air speed. A little hard to tell as it was windy today. It is still in the process of being painted (that's why you see the tape, etc in the photo) but I was so excited I just had to share.
![]()