Underside of Vertical what is this plate there for? Skystar Model 7
Underside of Vertical what is this plate there for? Skystar Model 7
TJay Larsen
M1 Custom
Jabiru 2200 85hp
My Kitfox 4 Speedster project has that same plate on top. All I can say about it is that when I took everything apart, the only thing that plate did on my airplane was provide a glue surface for gluing the wood rib on. If it really is supposed to have another purpose I don't know but that is all it did on my airplane.
John Brannen
Morris, IL
Sonerai IIL (Single Seat)
Kitfox 3/4 1050 - Rotax 582 (Back Flying and sold)
Kitfox IV 1050 - Rotax 582 (sold)
Kitfox IV 1200 Speedster - Rotax 912 UL (rebuilt and now flying)
Piper Twin Comanche (Sold)
Glasair 1 FT (Waiting to start)
Just looked at some old pictures, and for sure my Kitfox 4 that I just rebuilt doesn't have that piece. I don't think the other Kitfox 4 I have has that piece either. I would wonder if somehow a tail light was meant to somehow attach there?? Just a guess though. JImChuk
My model 4 does not have that plate either. Could it be used for attaching material to for fairing the top tube?
It would only be there on airplanes intended to have the full airfoil shaped tail. A standard 4 would not have it. Mine is a speedster and has the airfoil tail.
John Brannen
Morris, IL
Sonerai IIL (Single Seat)
Kitfox 3/4 1050 - Rotax 582 (Back Flying and sold)
Kitfox IV 1050 - Rotax 582 (sold)
Kitfox IV 1200 Speedster - Rotax 912 UL (rebuilt and now flying)
Piper Twin Comanche (Sold)
Glasair 1 FT (Waiting to start)
Maybe a Vor antenna mount. Installed by builder. Seen several on older builds. I helped an owner remove one from that exact location some years ago.It looked like this:
6387DFBA-7F02-4375-85A8-2B2C768026A2.jpeg
A post from John McBean back in 2011 talking about the Vor antenna usually mounted to the top of the vertical.
Re: VOR/LOC antenna
Having now installed both antennas... the "wiskers" work very well.. although I am personally not crazy about the appearance.. top of the vertical is where most have been installed.. which on a tail wheel puts it at about eye level... on the tri-gear up on the vertical works great on the bottom ends up at about eye level again.. Have installed them inside the wing and that seemed to work well.
Yesterday and today I have been flying using the di-pole type.. Installed how Bob Archer suggested... So far it seems to work OK...... not as well as the wisker type.. but I will be doing some installation mods and re-testing over the next couple weeks.
It fits fine in the Hoerner "Speedster" style tips easily but not sure they would fit in the newer "standard" tips.
"The Sky is not the Limit... It's a Playground"
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear