Congratz and welcome Mark! Another black powder coated pile of airplane goodies.
Looking forward to seeing it come together!
All the best!
Congratz and welcome Mark! Another black powder coated pile of airplane goodies.
Looking forward to seeing it come together!
All the best!
"Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle
Brett Butler
Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
It’s been a bit crazy with work so not as much progress as I’d like, but here’s what I have done as of now. A few more weeks, and I should have some more work time. I found the front floorboard where the rudder pedal assembly attaches, is not plumb. I will have to shim it or I’m sure it will bind like others have found.
Also had to ask if the instructions had changed on p. 37, where it states to use a rivet not supplied in my kit. Says if using prefab parts, use a 1/8x1/8 SS rivet, builder fabricated parts use 1/8x1/4 AL rivets. I am only provided with AL rivets. Aaron told me the page has been updated in October. Just curious if others have this page?
Building
Kitfox 7STi
Oratex