-
Jet change with Zipper kit
Has anyone change jet size after installing the 104 HP Zipper kit. My engine burns rich with the clip on the the 3rd groove and lean on the second groove. I'm thinking if I increase the jet size it might get a more consistent fuel burn. Ideas?
-
Re: Jet change with Zipper kit
With the 582, sometimes I would put a thin washer under the clip that raised the needle 1/2 the amount moving to the next notch would do. The main jet is for full throttle ops, needle and needle jet control mid range ops. JImChuk
-
Super Moderator
Re: Jet change with Zipper kit
Hal recommended the stock jets for a ULS and the needles in the #3 (stock) position to me. That's what I did. Runs great for 500 hours now.
Av8r3400
Kitfox Model IV
The Mangy Fox
912UL 105hp Zipper
YouTube Videos
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules