Hello guys,

I'm installing the trim actuator and as you can see in the picture, there is not enough space for the nylon washer and the metal washer on both sides of the trim actuator.
The instructions say to file the tabs, but it seems like I'll have to file a lot to make the washer fit (the metal washer is pretty thick), so doing that will make the tabs thiner. I also don't want to bend the tabs and create a breaking point. Any suggestions?
The red arrow in the picture is where the other nylon and metal washer should be to my understanding, but there is not enough space. I can push the nylon washer there, but not the metal one.

IMG_5025.jpg


Thanks,
Motti