-
Aluminium spinner for GSC prop install instructions
I have a new old spun aluminium spinner, trying to identify brand supplier and find Basic install instructions diagrams.
Photo for reference below.
https://photos.app.goo.gl/DfhskmQ6cH1A2gN67
Last edited by MKIIRob; 12-14-2020 at 08:57 PM.
-
Re: Aluminium spinner for GSC prop install instructions
Try
https://www.leadingedgeairfoils.com
If they can't help, I will go find and scan my old instructions for you.
-
Re: Aluminium spinner for GSC prop install instructions
The GSC props are nice looking with the spinner but any tech help is kinda null, i am having trouble with the pitch on mine and ordered the pitch adjusting tool, (not even sure what the pitch angle is?
Last edited by DSL farms; 12-15-2020 at 01:30 PM.
Reason: pdf
-
Re: Aluminium spinner for GSC prop install instructions
I use the iHandy Level app on my iPhone to set pitch. First, place iphone on bottom door facing and press the calibration button.
Pull a prop blade horizontal and place iphone 7" from tip. Rotate blade to 16 degrees pitch. Repeat for each blade.
Double check everything tight before test run.
With the tailwheel strapped to my SUV, this gives my 912UL about 5200 rpm static WOT.
-
Re: Aluminium spinner for GSC prop install instructions
Ask to talk to "Marty" at GSC, not Leading Edge. He's extremely knowledgeable. I run a Tech III, and recently replaced it with the same. Love this prop, and have nothing but good words for Marty and the rest of the staff. Business is in Canada (250) 549-3772
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules