Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: 912is CHT not reading on G3X

  1. #1
    Senior Member
    Join Date
    Dec 2017
    Location
    Canada
    Posts
    308

    Default 912is CHT not reading on G3X

    Just started wetting my engine and checking pressures, levels etc.

    I have a 912is connected to a G3X via Fadec connection. Everything is showing and reading fine except CHT temp.

    I've pulled the sensor and then checked fadec. The garmin shows coolant sensor fault as expected. Plug it back in and fault its gone. I think it's safe to assume the g3x is receiving info from the sensor? Additionally i checked the resistance on the sensor and it read fine given the temp in the shed.

    So I am thinking configuration. However, when I goto settings for cht there is no option to select Fadec like all other sensors. See images.

    Anyone have any ideas?



    Sent from my SM-G973W using Tapatalk
    912 IS
    Airmaster Prop
    Garmin Stack
    C-FKLO

  2. #2
    Senior Member JoeRuscito's Avatar
    Join Date
    Jun 2018
    Location
    Charleston, SC
    Posts
    361

    Default Re: 912is CHT not reading on G3X

    I don’t think there is CHT on the 912is. Only coolant temp. So if you selected fadec for coolant temp you are all set. The 912is has a probe on the head but it’s actually measuring water temp in the head as I understand it.


    Sent from my iPhone using Tapatalk

  3. #3

    Default Re: 912is CHT not reading on G3X

    You are correct Joe. My 912iS just shows coolant temp. (On my Dynon screen)
    Joe Gallagher
    Flying 7SS

    http://frontierfox.home.blog

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •