Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: Covering Cabane V gear frame

  1. 10-20-2020, 04:52 PM #1
    KevinL
    KevinL is offline
    Join Date
    Oct 2020
    Location
    Kennewick, WA
    Posts
    4

    Default Covering Cabane V gear frame

    Is anyone bonding in ribs or supports on the Cabane V gear frames or just covering as is? I'm concerned about the potential for the fabric to flutter and become loose over time given the amount of space between the frame tubes. Powerplant is a Rotec R-3600.
    Reply With Quote Reply With Quote
  2. 10-20-2020, 05:12 PM #2
    Delta Whisky
    Delta Whisky is offline
    Senior Member Delta Whisky's Avatar
    Join Date
    Dec 2017
    Location
    Amissville, VA
    Posts
    638

    Default Re: Covering Cabane V gear frame

    Although my example is on a 7, I installed ribs; for the reason you mentioned as well as for looks. I'm thinking it is a must for a R-3600 powered example. At least I have the round cowl part of your equation.
    Really finished 2 small.jpgGear legs finished covering small.jpgGear leg rib install small.jpg
    See my build log at:http://www.mykitlog.com/lowandslow/
    Reply With Quote Reply With Quote
  3. 10-20-2020, 09:43 PM #3
    KevinL
    KevinL is offline
    Join Date
    Oct 2020
    Location
    Kennewick, WA
    Posts
    4

    Default Re: Covering Cabane V gear frame

    Quote Originally Posted by Delta Whisky View Post
    Although my example is on a 7, I installed ribs; for the reason you mentioned as well as for looks. I'm thinking it is a must for a R-3600 powered example. At least I have the round cowl part of your equation.
    Really finished 2 small.jpgGear legs finished covering small.jpgGear leg rib install small.jpg
    Thanks much for the reply and pics. I'll follow your example.
    Reply With Quote Reply With Quote
  4. 10-20-2020, 09:44 PM #4
    Dusty
    Dusty is offline
    Senior Member Dusty's Avatar
    Join Date
    Dec 2012
    Location
    Christchurch, New Zealand
    Posts
    378

    Default Re: Covering Cabane V gear frame

    Watch any Trent Palmer video,his flutter real bad. The ribs look good
    Reply With Quote Reply With Quote
  5. 10-21-2020, 04:04 PM #5
    Delta Whisky
    Delta Whisky is offline
    Senior Member Delta Whisky's Avatar
    Join Date
    Dec 2017
    Location
    Amissville, VA
    Posts
    638

    Default Re: Covering Cabane V gear frame

    Kevin - I it would be helpful, sent a pm with your email address and I'll send full size pdf and/or cad drawing for the ribs. Darrel
    See my build log at:http://www.mykitlog.com/lowandslow/
    Reply With Quote Reply With Quote
  6. 10-21-2020, 04:57 PM #6
    Eric Page
    Eric Page is offline
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    868

    Default Re: Covering Cabane V gear frame

    Delta Whiskey -- tried to send you a PM, but your inbox is full.
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings
    Reply With Quote Reply With Quote
  7. 10-21-2020, 05:37 PM #7
    Delta Whisky
    Delta Whisky is offline
    Senior Member Delta Whisky's Avatar
    Join Date
    Dec 2017
    Location
    Amissville, VA
    Posts
    638

    Default Re: Covering Cabane V gear frame

    Opps - my apology - now fixed.
    See my build log at:http://www.mykitlog.com/lowandslow/
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules