Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser CPS Parts EarthX Batteries
Results 1 to 8 of 8

Thread: Prop Tape

  1. #1
    dginok's Avatar
    Join Date
    Aug 2009
    Location
    Norman, OK
    Posts
    69

    Default Prop Tape

    I have an IVOProp on my Super Sport. The original stainless leading edge tapes did not last long after my first flight, getting beaten up pretty badly from ground debris, especially from a particularly dirty ramp that I would visit. The tape would get punctures and tears surprisingly easily. So, I bought new stainless tape, applied it per the IVOProp instructions and soon thereafter had the same results.

    After that, I went looking for an alternative tape to the stainless variety. I tried a few different tapes, with varying degrees of success, but none of them satisfactorily protected the prop blades.

    I recently came across 3M 8681HS polyurethane protective tape. I bought some of that off of eBay, not expecting much based on my experience with other tapes. It is fairly thin, but apparently is very tough stuff. I have flown into many of the same places that beat the heck out of other tapes, but the 8681 tape has taken the abuse with no resulting damage. I have about forty hours on it so far, and it is looking nearly as good as when it was installed.

    This (gray) tape looks good against the black IVOProp blades, and it's great not to have to apply super glue around the tape perimeter as IVO has you do with the stainless tapes.

    20200602_140207.jpg
    Doug
    Super Sport
    912ULS
    Constant Speed IVOProp


  2. #2
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,160

    Default Re: Prop Tape

    Does that tape come with a paper back that you peal off to apply to the prop? Thanks, JImChuk

  3. #3
    dginok's Avatar
    Join Date
    Aug 2009
    Location
    Norman, OK
    Posts
    69

    Default Re: Prop Tape

    It has a clear plastic release liner covering the adhesive.
    Doug
    Super Sport
    912ULS
    Constant Speed IVOProp


  4. #4
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,160

    Default Re: Prop Tape

    If enough people were interested in using this tape, it would make sense for one person to buy a longer roll at a lower cost, and mail it to the interested parties. Anyone interested? JImChuk

  5. #5
    dginok's Avatar
    Join Date
    Aug 2009
    Location
    Norman, OK
    Posts
    69

    Default Re: Prop Tape

    The item number that I bought from eBay is 253181460719. It's $12.50 for a 2 inch by 1 yard piece, with a discount for larger quantities.
    Doug
    Super Sport
    912ULS
    Constant Speed IVOProp


  6. #6
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,160

    Default Re: Prop Tape

    I'm thinking about buying a larger amount. Is anyone interested in some 2 1/2" wide medium dark gray color? $10.50 per yard shipped. I would cut it in 1' pieces so I could ship them in an envelope. Send me a PM. If enough are interested, I'll get a roll. JImChuk

  7. #7

    Join Date
    Jul 2016
    Location
    Ester,Alaska
    Posts
    35

    Default Re: Prop Tape

    Wonder if thats the same tape they sell at the welding store? Me and L where just talkin about this the other day, for the tape between the prop sections for ur inspection tape to check if prop is comin loose, Ill have to check on that asap.

  8. #8
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,160

    Default Re: Prop Tape

    I don't think this would work on an IVO prop where you put it between the blades to detect movement. On the blade tips should be fine. I think it is probably to flexable to go between the blades to detect movement. JImChuk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •