Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Fuse Panels

  1. #1

    Join Date
    Jun 2018
    Location
    San Diego, CA
    Posts
    75

    Default Fuse Panels

    I'm looking for a fuse panel similar to the one Delta Whiskey is using in the attached picture. Does anybody know what it might be or where to get one?
    Mike
    Instrument panel and stick grips completed small.jpg
    Mike
    Building the JaMFox N677JM
    Kitfox 5 Vixen
    KRNM

  2. #2
    Administrator DesertFox4's Avatar
    Join Date
    Aug 2008
    Location
    Arizona
    Posts
    3,562

    Default Re: Fuse Panels

    Not sure if exact copy but 2 minutes on AircraftSpruce yielded this:

    https://www.aircraftspruce.com/pages...userelay-1.php


    DesertFox4
    Admin.
    7 Super Sport
    912 ULS Tri-gear


  3. #3

    Join Date
    Jun 2018
    Location
    San Diego, CA
    Posts
    75

    Default Re: Fuse Panels

    I've seen those. I was wondering if there was a purpose built flush mount fuse panel. If not, I'll probably use something very similar to what you posted.

    Mike
    Mike
    Building the JaMFox N677JM
    Kitfox 5 Vixen
    KRNM

  4. #4
    Senior Member Delta Whisky's Avatar
    Join Date
    Dec 2017
    Location
    Amissville, VA
    Posts
    637

    Default Re: Fuse Panels

    Mike - it is a Eaton Bussmann 15305-1-6-0 fuse panel. I purchased mine from Connenctor Concepts, Inc but I just checked their web site and couldn't find it. I see that it might be available at Mouser. I say "might" because finding the exact item is a little tricky - you have to decipher the part number code (to get exactly what you want) and then the data base at any number of part supply houses. A quick tour thru the internet tells me that Waytek, Peerless and a number of electronic outlets also sell them.

  5. #5

    Join Date
    Jun 2018
    Location
    San Diego, CA
    Posts
    75

    Default Re: Fuse Panels

    Thanks. I've been looking at those.
    Mike
    Building the JaMFox N677JM
    Kitfox 5 Vixen
    KRNM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •