Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 2 of 2

Thread: Ack E-04 ELT wiring question

  1. #1

    Join Date
    Jul 2018
    Location
    Westfield, IN
    Posts
    187

    Default Ack E-04 ELT wiring question

    All,

    quick question... Wiring an Ack E-04 ELT into my GDU 460.

    The G3X instructions show a signal ground wire going to the Ack. The Ack instructions show one of the four terminals going to aircraft ground. Is that the same wire? I have always taken anything labeled aircraft ground back to a single ground point on my firewall. Does that need to be done here?

    Thanks and pics below

    img_2277.jpg

    img_2276.jpg

  2. #2
    Senior Member
    Join Date
    Dec 2017
    Location
    Mapleton,UT
    Posts
    1,224

    Default Re: Ack E-04 ELT wiring question

    Are you running GPS20A? The elt can also be hooked up to GPS20A to receive GPS position data from that. This was the closer/better option for me.
    Last edited by Shadowrider; 08-15-2020 at 03:14 PM.
    Dustin Dickerson

    Building 7ss STI x 2
    Oratex
    29" shock monster
    EP912STI 155hp
    Garmin
    N33TF......FLYING!
    N53TF......FLYING!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •