Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Door measurement help

  1. #1
    Super Moderator desertdave's Avatar
    Join Date
    Jun 2019
    Location
    Scottsdale AZ
    Posts
    304

    Default Door measurement help

    I want to redo the lexan on the doors on my Series 6. If anybody is close to their series 5, 6 or 7 can you please measure what size sheet of lexan I need to buy. With everybody making COVID barriers I will probably have to order it and I don't want to under or over order.

    Thanks!
    Dave
    KitFox 6 Taildragger
    912 ULS
    Whirlwind 70” Prop
    Garmin G3x
    All around nice guy

  2. #2
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    863

    Default Re: Door measurement help

    I have a Series 5 with the bottom half of each door covered with fiberglass. If that's what you're doing, you'll need two pieces of Lexan 17-1/2" x 36-3/4". To cover the whole door, you'll need two pieces 31-1/2" x 41-1/4". In both cases I measured the rectangle that would enclose the panel, plus one inch in each direction to allow for trimming to fit.
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings

  3. #3
    Super Moderator desertdave's Avatar
    Join Date
    Jun 2019
    Location
    Scottsdale AZ
    Posts
    304

    Default Re: Door measurement help

    Awesome! Thank you!!
    Dave
    KitFox 6 Taildragger
    912 ULS
    Whirlwind 70” Prop
    Garmin G3x
    All around nice guy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •