Looks good Todd. Moving along nicely.
Looks good Todd. Moving along nicely.
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
Hi all,
Had a few good days and was able to make some significant progress (well, for me). The flaperons have been hung and the tips finished. A little LPS1 on the hinges and they move like butter!!
IMG_1775.jpgIMG_1774.jpg
IMG_1772.jpgIMG_1771.jpg
Finished the routing of Pitot/AOA tubing along with the OAT wiring. I mounted the OAT next to the pitot.
IMG_1782.jpgIMG_1781.jpg
And the big news, I started covering the wings!! Shrunk to 250, rib stitched and wing tip mounting hardware in place. Shrinking to 350 and first coat of Poly brush tomorrow!! I actually really enjoyed the rib stitching. Kind of therapeutic. More photos to come.
IMG_1907.jpgIMG_1906.jpg
That's it for now.
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop
Looks great Todd. Tell the truth, your wife did most of the stitching right? So cool that she is involved to the extent of taking the covering class and all. She isn't going to let you have all the fun. Keep it up. We have places to go.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Happy New Year All. I'm so behind on updating my build log. Work's been crazy and I've been dedicating all my free time to building (I know; preaching to the choir!) Here's an update on what I've gotten done the past year.
Fabricated this mount for the ELT antenna:
ELT Antenna.jpg
Battery, ELT, and back up battery tray behind the baggage area.
IMG_1968.jpg
Starting the covering process on the fuselage.
IMG_1976.jpg
The handle proved to be a bit of a challenge. Think it turned out ok.
IMG_1980.jpg
Fuselage all covered. Actually enjoyed this part quite a bit.
IMG_1982.jpg
Always nice to have great help. This build is a family affair.
IMG_1916.jpg
First coat of PolyBrush all on.
IMG_1986.jpg IMG_1919.jpg
Dolly for the fuel cap.
IMG_1930.jpg
Getting ready to install the reinforcing tapes.
IMG_1947.jpgIMG_1948.jpg
Frankenfuselage!!
IMG_1989.jpg
Spraying final coat of PolyBrush
Attachment 31468
Doubling checking the movement of the flaperons.
Attachment 31470
Making the wings silver.
Attachment 31469
More to come....
Last edited by tdldedcd; 01-01-2023 at 04:51 PM.
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop
Starting the Final assembly and firewall forward process.
Installing the firewall and fitting the boot cowl. I've since added filler pieces where the boot cowl meets the cowl attach angle. I wanted a more flush fit.
Bootcowl.jpgbootcowl2.jpg
Fuel Lines from the header tank. First time using a tube bender. The wire technique recommended by Eddie really worked well.
IMG_2450.jpgFuel line2.jpg
Last edited by tdldedcd; 01-01-2023 at 05:47 PM.
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop
Todd you are into the fun stuff now! Everything is looking great!
Harlan and Susan Payne
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop.
https://www.youtube.com/@KitfoxPilot/videos
That's a mighty fine and shiny paint job there! Looks really good!
Some great progress last year, keep it up!
What made you put your battery, back up battery and associated equipment behind the luggage rack?
Just saw your engine/propeller you're going to use. That 26lb Airmaster prop has to be the reason!
"Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle
Brett Butler
Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
Thanks Harlan for the kind words and all your help and support!
Brett, you got it. Trying to offset all the weight up front!
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop
Seriously? Where is the engine? Those pics are already outdated. Todds farther along than he portrays.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Eddie is right. There is more, but I had posted so many pictures because I was so far behind that the system said I couldn't post any more pictures. So, here goes round 3.
Someone asked me about the paint booth so I figured I share with all. It's similar to what Brian Bowen used and I found it on Amazon. I've been very happy with it and it's holding up very well. Be sure to stake it down, even with the wooden reinforcement stands inside weighing it down. Made of a very exciting afternoon!!!
IMG_2013.jpg
More fuel lines from the header tank to firewall. You can also see the brake line going through the floor to the landing gear.
Fuel line2.jpgIMG_2450.jpg
Here you go Eddie!!! The engine is on and several of the fuel lines have been fabricated.
915 is on.jpg
The cowling is starting to take shape. It was a pretty rough start and I wasn't really sure where to even start. But everyone's advice is spot on. Work slow, taking a little at a time and it all works out. I could never get the tabs on the front to fit over the bottom cowl so I did like many others and cut them off. I'll manufacture some metal ones to take their place.
IMG_2479.jpgIMG_2481.jpgIMG_2480.jpg
One issue I had was the whole cowl sagged after I took the tape off. Had it all lined up, drilled it, clecoed it, high fived the kid and went in to have a beer. Came back out and the whole thing was hanging down lower than the spinner. Soooooo, after a bit of a freak out and a call to Eddie for advise, we moved the holes where the cowl mounts to the boot cowl and it is lining back up great. Lisa thanks you Eddie!!!
Cowling 3.jpgcowling1.jpgCowlinng 2.jpg,
The remote avionics tray is ready to go in.
Remote avionics tray.jpg
The Radiator/Oiler cooler combo is ready to go in. Just want to get the camlocs in first.
Radiator.jpg
Ted Myers has been helping out with the wiring diagrams and has been helping me figure out what I'm doing. Would definitely recommend him for help!
Also want to say a big thank you to Austin from PolyFiber. He's been amazing with the covering and painting. Great guy!!!
That's it for now. Wish everyone a happy new year. Gonna try and stay up to date from this point.
Todd
Todd Downing
SS7 458LK
Building
G3X
915is, Airmaster prop