Reaming of tail hinge tabs and bushings were easier than I thought they would be. Now on to these ribs.
Reaming of tail hinge tabs and bushings were easier than I thought they would be. Now on to these ribs.
Starfox
Prop is now ordered. Here is a sample panel layout. Still a few thing to get done but closer.
Starfox
That is going to be a good looking panel.
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
It looks like you're using a Dynon intercom, radio and A/P control panel, but not a Dynon EFIS. Are you sure the SV-AP-PANEL will work in a non-Dynon system?
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
SCU is proven by Kitfox. Info flows thru it and to the efis. It is just a smaller panel that lists the faults. Same company that made the larger panel. Just compact so I can add other items that I like.
Starfox
Eric, the whole system is Advanced flight Systems. Advanced and Dynon are the same company. Only other parts that are different are the SCU for the engine-prop combination and the Ipad on the right side of the panel.
Starfox
Eric Page
Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
Member: EAA Lifetime, AOPA, ALPA
ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
Map of Landings
Tail ribs in and varnished. Took a while to decide on the end caps. Got them where I like them with fabric pulled over them
Starfox
Just another hobby interfering with my build. Starting two colts. Here is a de-spooking clinic last Sunday. Start riding them next month. Just have to keep up on the build at night I guess.
Starfox
You have anymore photos or info on how you did those end caps? They look very well done with minimal superfil.
Dave.