I used them. I used Oratex. The last thing I wanted to see was a trailing edge resembling the Batman logo.
I used them. I used Oratex. The last thing I wanted to see was a trailing edge resembling the Batman logo.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
The material is not included in the kit. It is not required and is merely a suggested technique many builders use to ensure the fabric doesn't warp the trailing edge.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Was not included and no mention in our manual. Maybe the STI wing is different.🤷*♂️
Dustin Dickerson
Building 7ss STI x 2
Oratex
29" shock monster
EP912STI 155hp
Garmin
N33TF......FLYING!
N53TF......FLYING!
They weren't installed on the Kitfox IV I am working on that was covered with polyfiber, and they weren't installed on my friends Kitfox IV also covered with polyfiber. Here are a couple pictures of the wings on my project airplane that have since had the covering removed. Trailing edge looks pretty darn straight to me. I'm sticking with the motto that everything you add adds to the empty weight. When I recover my IV it will not be getting any of these tubes.
20200401_164951.jpg
Flaperon close up.jpg
John Brannen
Morris, IL
Sonerai IIL (Single Seat)
Kitfox 3/4 1050 - Rotax 582 (Back Flying and sold)
Kitfox IV 1050 - Rotax 582 (sold)
Kitfox IV 1200 Speedster - Rotax 912 UL (rebuilt and now flying)
Piper Twin Comanche (Sold)
Glasair 1 FT (Waiting to start)
Someone else came up with this idea. I just plagiarized and tweaked it.
I priced out some carbon tube. Was more economical to buy these practice carbon arrows and you can get two braces per arrow. I will be
covering the wing soon so I'll let you know how it goes. Lighter than the aluminum tubes? Yes. Stronger? Yes, since it is in compression.
"Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle
Brett Butler
Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
Mine might have been a little different than Delta Whisky, but I originally thought the tubing wouldn’t fit properly also. However, I found that with the proper “rolling” technique it would pop into place nice and tightly, although I still used Hysol to really secure it.
John Evens
Arvada, CO
Kitfox SS7 N27JE
EAA Lifetime
Chap. 43 honorary Lifetime