Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: Tail dimensions on the Series 7? (good guesses welcome)

  1. #1

    Join Date
    May 2020
    Location
    Arizona
    Posts
    13

    Default Tail dimensions on the Series 7? (good guesses welcome)

    Sort of what it says on the tin. Looking for the rough dimensions of the S7's tail. Ideally span and chord, as I can calculate area and such off those, but any rough estimate of span, chord, or area is definitely appreciated.

  2. #2

    Join Date
    Sep 2015
    Location
    Crawford, CO
    Posts
    165

    Default Re: Tail dimensions on the Series 7? (good guesses welcome)

    What are you trying to do? Just curious...

  3. #3

    Join Date
    May 2020
    Location
    Arizona
    Posts
    13

    Default Re: Tail dimensions on the Series 7? (good guesses welcome)

    Quote Originally Posted by Clark in AZ View Post
    What are you trying to do? Just curious...
    Just working on a model of an S7 for a flight simulator, actually.

  4. #4
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    866

    Default Re: Tail dimensions on the Series 7? (good guesses welcome)

    Quote Originally Posted by fsendventd View Post
    Sort of what it says on the tin. Looking for the rough dimensions of the S7's tail. Ideally span and chord, as I can calculate area and such off those, but any rough estimate of span, chord, or area is definitely appreciated.

    I just stood my horizonal tail up a couple days ago and it hit the floor and ceiling in my room which is 8ft so the tail is around 8ft. Don't know about the chord .
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •