Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Kitfox Premade Panels and wire harness

  1. 05-06-2020, 07:49 AM #1
    jdmcbean
    jdmcbean is offline
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    536

    Default Kitfox Premade Panels and wire harness

    Well, this has been a long time in the works..

    Panel Video https://youtu.be/sL7urbhTevs
    Attached Images Attached Images
    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"
    Reply With Quote Reply With Quote
  2. 05-06-2020, 08:44 AM #2
    efwd
    efwd is offline
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,823

    Default Re: Kitfox Premade Panels and wire harness

    Very Nice Kitfox! I wish this had been available back when I got mine.
    Eddie Forward
    Flying
    SS7, 912iS, Garmin G3X
    Reply With Quote Reply With Quote
  3. 05-06-2020, 04:36 PM #3
    mattkalin
    mattkalin is offline
    mattkalin's Avatar
    Join Date
    Mar 2020
    Location
    Saint Joseph, MI
    Posts
    32

    Default Re: Kitfox Premade Panels and wire harness

    The panel mounted comm radio is that Com 2 with a remote com 1? Or just single com radio?

    edit: after watching the video again it appears that panel com radio is primary and only comm radio in this config.
    Last edited by mattkalin; 05-06-2020 at 04:58 PM.
    Instagram- N985MK

    Kitfox S7 STI - Building...Hope to be flying Fall 2023!
    Reply With Quote Reply With Quote
  4. 05-13-2020, 06:53 AM #4
    bbs428
    bbs428 is offline
    Senior Member bbs428's Avatar
    Join Date
    Jan 2015
    Location
    SW Missouri
    Posts
    659

    Default Re: Kitfox Premade Panels and wire harness

    Nice! The video was great. I'll be giving John a call. My layout is almost the same and g3x touch as well but
    with a Rotax 912ul setup. I'm interested in the pre made instrument panel and the transponder mounting plate.
    They look just right. I can wire it all up.
    "Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle

    Brett Butler
    Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
    Reply With Quote Reply With Quote
  5. 07-19-2020, 09:06 AM #5
    G coco
    G coco is offline
    Join Date
    Jul 2020
    Location
    Palm Harbor, FL
    Posts
    26

    Default Re: Kitfox Premade Panels and wire harness

    Quote Originally Posted by jdmcbean View Post
    Well, this has been a long time in the works..

    Panel Video https://youtu.be/sL7urbhTevs
    Hey John, just spoke with you last week and put a deposit down on a 7SS. I will most definitely be interested in getting a premade panel for my kit. I'd like to know what all the different options are along with pricing, etc. Also, I ordered the kit with the fast build wings, so i was wondering if doing the premade panel would start to get me too close to the 51% rule. Anyway, the panels look great and I'm looking forward to getting some information!

    Thanks,
    Glenn Raby
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules