Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 5 of 5

Thread: Kitfox Premade Panels and wire harness

  1. #1
    Senior Member jdmcbean's Avatar
    Join Date
    Jun 2008
    Location
    Homedale, ID
    Posts
    536

    Default Kitfox Premade Panels and wire harness

    Well, this has been a long time in the works..

    Panel Video https://youtu.be/sL7urbhTevs
    Attached Images Attached Images
    John McBean
    www.kitfoxaircraft.com
    208.337.5111

    "The Sky is not the Limit... It's a Playground"

  2. #2
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default Re: Kitfox Premade Panels and wire harness

    Very Nice Kitfox! I wish this had been available back when I got mine.
    Eddie Forward
    Flying
    SS7, 912iS, Garmin G3X

  3. #3
    mattkalin's Avatar
    Join Date
    Mar 2020
    Location
    Saint Joseph, MI
    Posts
    32

    Default Re: Kitfox Premade Panels and wire harness

    The panel mounted comm radio is that Com 2 with a remote com 1? Or just single com radio?

    edit: after watching the video again it appears that panel com radio is primary and only comm radio in this config.
    Last edited by mattkalin; 05-06-2020 at 04:58 PM.
    Instagram- N985MK

    Kitfox S7 STI - Building...Hope to be flying Fall 2023!

  4. #4
    Senior Member bbs428's Avatar
    Join Date
    Jan 2015
    Location
    SW Missouri
    Posts
    649

    Default Re: Kitfox Premade Panels and wire harness

    Nice! The video was great. I'll be giving John a call. My layout is almost the same and g3x touch as well but
    with a Rotax 912ul setup. I'm interested in the pre made instrument panel and the transponder mounting plate.
    They look just right. I can wire it all up.
    Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive. — Ernie Pyle

    Brett Butler
    Flying: 1998 Model 5 Outback, 912ul Zipper 110hp, G3x avionics, ss7 upgrades

  5. #5

    Join Date
    Jul 2020
    Location
    Palm Harbor, FL
    Posts
    26

    Default Re: Kitfox Premade Panels and wire harness

    Quote Originally Posted by jdmcbean View Post
    Well, this has been a long time in the works..

    Panel Video https://youtu.be/sL7urbhTevs
    Hey John, just spoke with you last week and put a deposit down on a 7SS. I will most definitely be interested in getting a premade panel for my kit. I'd like to know what all the different options are along with pricing, etc. Also, I ordered the kit with the fast build wings, so i was wondering if doing the premade panel would start to get me too close to the 51% rule. Anyway, the panels look great and I'm looking forward to getting some information!

    Thanks,
    Glenn Raby

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •