I really like that Harlan. Which type of filament did you use for this?
I really like that Harlan. Which type of filament did you use for this?
Phil Nelson
A&P-IA, Maintenance Instructor
KF 5 Outback, Cont. IO-240
Flying since 2016
I'm not sure what you are asking about which type of Filament? You will have to dumb it down a little for me. haha
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
You are correct, just traced the pattern onto plywood. thanks
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
I 3d printed the flaperon end caps on my Kitfox 4 project. First picture is on the airplane with the wings folded and they fit great. Second is what the 3d model looked like. I used PLA for these because I was going to paint them, but decided I like them black. Since the airfoil is symmetric, the rounded end is perfect from being a body of revolution 180 degrees. The part that sticks inside the flaperon has a step the thickness of the skin so everything is flush. Since they are unpainted PLA, I'll keep an eye on them and redo them in ABS if needed. The attached zip file is the stl file in case anyone else wants to print some.
20211220_195630.jpg
Untitled.jpg
Flaperon Tip.zip
John Brannen
Morris, IL
Sonerai IIL (Single Seat)
Kitfox 3/4 1050 - Rotax 582 (Back Flying and sold)
Kitfox IV 1050 - Rotax 582 (sold)
Kitfox IV 1200 Speedster - Rotax 912 UL (project)
Piper Twin Comanche (Sold)
Glasair 1 FT (Waiting to start)
Finally back on the plane. We got the cowls painted and mounted. Still have some air duct seals to put in but getting closer.
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
Finally got the inspection covers finished. I went ahead and put the brushes in that slow the drafts. Thanks Jim Ott.
Ready to work on interior now.
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
Yeah Jim did us a solid when he shared that little tidbit eh? I literally ordered the stuff after I read it and was not even close to being ready for it. Looks good Harlan. So you decided to cover the covers with the Oratex rather than paint them? Also did you use the tool to do the edges or the block of wood trick that John Evans used?
Gary
Gary (Geek) Phenning
Leavenworth (Not the Prison), WA
Kitfox STi N68SG
Gary,
I've got that roller tool if you want to borrow it. Works great.
Kitfox 5 (under construction)
Commercial SE/ME, CFII