Great job Harlan, Susan and crew. You’re at the build finish line and Phase one starting gate.
Hope your A.W. inspection goes well.🤞
Great job Harlan, Susan and crew. You’re at the build finish line and Phase one starting gate.
Hope your A.W. inspection goes well.🤞
DesertFox4
Admin.
7 Super Sport912 ULS Tri-gear
That's really exciting Harlan! Can't wait to hear about the first flight.
Phil Nelson
A&P-IA, Maintenance Instructor
KF 5 Outback, Cont. IO-240
Flying since 2016
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
Harlan, went back to your first post that was on 4/11/2020 so thats just over a year and a half for your build, not too shabby in my book . Exciting times ahead , you will enjoy that Kitfox. After 18 years of flying my Series 5 , I still can't wait for my next flight. Have fun . Bruce N199CL
Thanks Bruce I hope I get to fly mine for 18 years like you have. I think I'll buy factory built next time...... HaHaHa
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
Wait till you fly the plane you and the wife built together for the first time. You might start thinking about a second build.
Eddie Forward
Flying
SS7, 912iS, Garmin G3X
Harlan - first, congrats on a job well done. Second, the first step to healing is expression of the problem. Something like: "I have a problem, I'm a builder. It consumes me night and day. My next project starts . . . . ."
See my build log at:http://www.mykitlog.com/lowandslow/
Hi Harlan,
You show the stainless steel door trim here and in your video. I can't find that in the catalog and when I called Kitfox, the girl (sounded young) I talked to didn't know what I was talking about. Where did you get them? If it's a Kitfox part, what's the part number, please?
Thanks...
Well I had seen them on a kitfox at a show and I called later to kitfox and asked Debra about the stainless door trim caps and she sold me some. So I don't have a number of any kind. Just ask Debra for the stainless trim Harlan got I guess?
Harlan and Susan Payne
Sold Piper Archer
Flying FarmFox STI Kitfox N61HP
Rotax 915is, Airmaster prop
https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw
Here is the part number, 99017.000 Door Channel Stainless Steel, you will need two if you are only doing the bottom sill of the door and two more if you are doing the rear frame.