Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 32 of 58 FirstFirst ... 2228293031323334353642 ... LastLast
Results 311 to 320 of 573

Thread: STI Farm Fox Build Log

  1. #311
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: STI Farm Fox Build Log

    It is a mess around our country for sure Eddie. The people in southern Illinois have pretty much disobeyed the governor and continued working this time. The prop comes from New Zealand and I think they shut down is anyone sneezes over there.
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

  2. #312
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: STI Farm Fox Build Log

    We have been rained out from harvest a couple days.
    I finally got the panel finished and the wiring tidied up a bit, only a couple camera wires left to run when I get them.
    Windshield is next if anyone has any tips they would be welcome on that subject.
    Attached Images Attached Images
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

  3. #313
    Senior Member Benbell4140's Avatar
    Join Date
    Jun 2010
    Location
    Broussard LA
    Posts
    205

    Default Re: STI Farm Fox Build Log

    Looking great! I’m open to hints and tips on the windshield also.


    Sent from my iPhone using Tapatalk
    Ben Bell
    Building 7 super sport
    O200 powered

  4. #314
    Senior Member Eric Page's Avatar
    Join Date
    Jun 2020
    Location
    Toledo, WA
    Posts
    863

    Default Re: STI Farm Fox Build Log

    That's looking really good, Harlan. Nice work. What is the ball valve in the second photo used for?
    Eric Page
    Building: Kitfox 5 Safari | Rotax 912iS | Dynon HDX
    Member: EAA Lifetime, AOPA, ALPA
    ATP: AMEL | Comm: ASEL, Glider | ATCS: CTO
    Map of Landings

  5. #315
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: STI Farm Fox Build Log

    Thanks Eric, the ball valve opens and closes water for heat or no heat.
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

  6. #316
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: STI Farm Fox Build Log

    We have forward vision when the tails on the ground!
    Another words I got the backup camera put on pointing forward. Haha.
    Wiring is done.........again.
    Attached Images Attached Images
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

  7. #317

    Join Date
    May 2020
    Location
    Boise, ID
    Posts
    98

    Default Re: STI Farm Fox Build Log

    what magic is this??? :d
    Building N137DF
    STi, Rotax 915is, Airmaster

  8. #318
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: STI Farm Fox Build Log

    Its a wal mart magic backup camera. haha
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

  9. #319
    Senior Member efwd's Avatar
    Join Date
    Jun 2015
    Location
    Yorba Linda, CA
    Posts
    2,817

    Default Re: STI Farm Fox Build Log

    Hey Harlan. Is that as easy as just cutting the wire to the camera, putting pins on the wires and then plugging those into the plug that attaches to the PFD?
    Eddie Forward
    Flying
    SS7, 912iS, Garmin G3X

  10. #320
    Senior Member Kitfox Pilot's Avatar
    Join Date
    Aug 2019
    Location
    Spring Garden Illinois
    Posts
    859

    Default Re: STI Farm Fox Build Log

    Eddie, I bought an adapter at menards that coverts rca to the bnc on the back of the g3x. No cutting wires at all. Very simple.

    Tempo Communications BNC Male to RCA Female Adapter - 2 Pack at Menards®
    Harlan and Susan Payne
    Sold Piper Archer
    Flying FarmFox STI Kitfox N61HP
    Rotax 915is, Airmaster prop
    https://www.youtube.com/channel/UC5A...oCVUP15G0uB-Yw

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •