Finished wiring the panel - still have the engine hook ups to go.
Wiring almost complete.jpg
Finished wiring the panel - still have the engine hook ups to go.
Wiring almost complete.jpg
See my build log at:http://www.mykitlog.com/lowandslow/
Are you using the Powersonic battery as a backup?
Mike
Building the JaMFox N677JM
Kitfox 5 Vixen
KRNM
Yes sir - sort of. It will function as a true backup for about an hour if I secure everything but the bare-bones need-to-fly stuff. My primary goal was to be able to get the EFIS, EIS and the radio up and running before starting the engine and not make any of them suffer from power surges or the drop in voltage during start up. I isolated the Powersonic from the main battery with a Schottky diode so it (in theory anyway) doesn't participate in the start up.
See my build log at:http://www.mykitlog.com/lowandslow/
Added STOLSpeed VGs.
IMG_4896.jpg
Hey Larry, how about a before after report on your VG's once you get to flight testing. Thinking of doing the same . Thanks Bruce N199CL
Started fabricating back deck.
Mike Kahle
Jackson, MO
IV Classic 582
RV-12is building
Bryan
Project Kitfox
Bowen Aero LLC
Kitfox Model 5 Lycoming O-290 D powered
Building a Model 7 Apex powered
Redding, CA
http://www.youtube.com/c/ProjectKitfox
With expert help from Desertfox4 today I got my spinner installed.
Dave
KitFox 6 Taildragger
912 ULS
Whirlwind 70” Prop
Garmin G3x
All around nice guy