Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: IO 240 spinner.

  1. #1

    Join Date
    Feb 2017
    Location
    Crowell texas
    Posts
    5

    Default IO 240 spinner.

    I want to put a nicer spinner on Kitfox 5 IO 240 than a bolt on divers helmet. Using a sinsenich prop order spinner And the backing plate hits cowling John at kit fox says they don’t make and inverted backing plate. Don’t want to cut my cowling out. Does anyone had this problem? Ideas?

  2. #2
    Senior Member jrevens's Avatar
    Join Date
    Aug 2009
    Location
    Arvada, CO
    Posts
    2,145

    Default Re: IO 240 spinner.

    You could put a spacer plate between the engine's prop hub and the spinner rear plate (bulkhead)/prop.
    John Evens
    Arvada, CO
    Kitfox SS7 N27JE
    EAA Lifetime
    Chap. 43 honorary Lifetime

  3. #3

    Join Date
    Feb 2017
    Location
    Crowell texas
    Posts
    5

    Default Re: IO 240 spinner.

    My have found company in Wisconsin to fix new inverted backing plate for spinner. If not will build a spacer place to off set depth of backing pale. Thanks for reply

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •