Is there a standard size/height for these stands? Would some one give me the height to the pivot point that works good and pics would help also? Thanks
Is there a standard size/height for these stands? Would some one give me the height to the pivot point that works good and pics would help also? Thanks
This is the design I used.Assembly stands.pdf
See my build log at:http://www.mykitlog.com/lowandslow/
Opps - just noticed that you also requested a picture in action.Wing panel ready to cover.jpg
See my build log at:http://www.mykitlog.com/lowandslow/
Thank you very much!
I'm curious to know more about your fuselage rotisserie. Have any drawings of that?
Mike
Building the JaMFox N677JM
Kitfox 5 Vixen
KRNM
Check out the wing stands on project kitfox youtube, I am thinking of building mine like that.
I am 6ft tall and That sounds like a good idea to make them adjustable. Thanks
Two more points - 1. I just noticed that the last two pages in the pdf file were the basic dimensions for the sawhorses I put the fuselage on. 2. I'd recommend that however you mount the wings in whatever rotisserie you use, don't put the rotation point midpoint between the spars. I'll try to remember to measure where the CG is and get another note in tomorrow but centering on the CG will make your life a tad easier. Maybe someone has the answer handy and can weigh in this evening.
See my build log at:http://www.mykitlog.com/lowandslow/