Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 3 of 3

Thread: Nose wheel size?

  1. #1

    Join Date
    Jul 2018
    Location
    Weatherford Texas.
    Posts
    87

    Default Nose wheel size?

    Thinking of Berringer wheels and brakes, Just need to know what the diameter of the nose wheel is.

  2. #2
    Senior Member Dave S's Avatar
    Join Date
    Oct 2008
    Location
    St Paul, MN
    Posts
    1,833

    Default Re: Nose wheel size?

    The factory nose wheel setup uses a 5.00 by 5 tire.

    No idea if the setup you are looking at uses a different axle. The factory one has sealed ball bearings pressed into the wheel slipped over a 3/4" shaft with spacer tubes on each side.
    Dave S
    Kitfox 7 Trigear (Flying since 2009)
    912ULS Warp Drive

    St Paul, MN

  3. #3

    Join Date
    Jul 2018
    Location
    Weatherford Texas.
    Posts
    87

    Default Re: Nose wheel size?

    Thanks just trying to figure up what I want to buy and what I don't Cost wise.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •