Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 4 of 4

Thread: IV 912 Radiator Hose

  1. #1
    rawheels's Avatar
    Join Date
    Jul 2010
    Location
    Westfield, IN
    Posts
    67

    Default IV 912 Radiator Hose

    The 41908.000 and 41909.000 aluminum coolant lines that are supposed to go between the engine and radiator on the 912 install no longer come with the kit. A letter that comes with the install manual says items no longer in the kit "you can source easily for yourself". What have others used? Did you simply run 1" heater hose all the way?

    coolant_line.JPG

  2. #2

    Join Date
    Jul 2018
    Location
    Weatherford Texas.
    Posts
    87

    Default Re: IV 912 Radiator Hose

    I was wondering where the radiator is normally installed, I have seen one picture where someone installed it in the back of the Fuselage, with computer fans.

  3. #3

    Join Date
    Jun 2018
    Location
    San Diego, CA
    Posts
    76

    Default Re: IV 912 Radiator Hose

    I'd probably make my own aluminum tube. I have one of these at home:

    https://www.jegs.com/i/JEGS/555/8008...hoCHIoQAvD_BwE

    Works well.
    Mike
    Building the JaMFox N677JM
    Kitfox 5 Vixen
    KRNM

  4. #4
    Senior Member
    Join Date
    Feb 2011
    Location
    Dupuy,Qc
    Posts
    309

    Default Re: IV 912 Radiator Hose


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •