Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 29

Thread: Disassembly cleaning wing tank KITFOX3

  1. #11
    Senior Member
    Join Date
    Aug 2008
    Location
    Harvard, IL
    Posts
    337

    Default Re: Disassembly cleaning wing tank KITFOX3

    To get to the catalog click on the Kitfox logo at the top of the pages here or www.kitfoxaircraft.com. Click on "Store" and download the catalog. The phone number will also be available. I know a phone call wouldn't be cheap, but would answer a lot of your questions. Or send an email.

    Rick

  2. #12
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,562

    Default Re: Disassembly cleaning wing tank KITFOX3

    I searched a bit in the archives using the word Kreem and found a good bit of info on others who had cleaned their tanks. If you do remove the tanks, you will have to cut the top fabric off above the tank to change them out. Here is a link to one thread on removing the kreem from tanks. JImChuk
    https://teamkitfox.com/Forums/threads/4124-In-Wing-Kreem-Slosh-removal-method?highlight=kreem

  3. #13
    Senior Member
    Join Date
    Dec 2017
    Location
    Mapleton,UT
    Posts
    1,224

    Default Re: Disassembly cleaning wing tank KITFOX3

    If your going to the trouble to remove the tanks, I would just replace them.

    Brandon can be reached through facebook. I think if you send a message to kitfox on facebook is how to get ahold of Brandon.
    Dustin Dickerson

    Building 7ss STI x 2
    Oratex
    29" shock monster
    EP912STI 155hp
    Garmin
    N33TF......FLYING!
    N53TF......FLYING!

  4. #14

    Join Date
    Nov 2019
    Location
    MASSY
    Posts
    29

    Default Re: Disassembly cleaning wing tank KITFOX3

    Quote Originally Posted by bumsteer View Post
    To get to the catalog click on the Kitfox logo at the top of the pages here or www.kitfoxaircraft.com. Click on "Store" and download the catalog. The phone number will also be available. I know a phone call wouldn't be cheap, but would answer a lot of your questions. Or send an email.

    Rick
    Thanks, I found it but the question is, how to remove the tank?

    Best regards
    ChrisFlyer

  5. #15

    Join Date
    Nov 2019
    Location
    MASSY
    Posts
    29

    Default Re: Disassembly cleaning wing tank KITFOX3

    Quote Originally Posted by avidflyer View Post
    I searched a bit in the archives using the word Kreem and found a good bit of info on others who had cleaned their tanks. If you do remove the tanks, you will have to cut the top fabric off above the tank to change them out. Here is a link to one thread on removing the kreem from tanks. JImChuk
    https://teamkitfox.com/Forums/threads/4124-In-Wing-Kreem-Slosh-removal-method?highlight=kreem
    Excellent information !! Thank you. I would like to avoid the expense of tanks ordered on another continent ... I'm looking at that. thanks again
    ChrisFlyer

  6. #16

    Join Date
    Nov 2019
    Location
    MASSY
    Posts
    29

    Default Re: Disassembly cleaning wing tank KITFOX3

    Quote Originally Posted by Shadowrider View Post
    If your going to the trouble to remove the tanks, I would just replace them.

    Brandon can be reached through facebook. I think if you send a message to kitfox on facebook is how to get ahold of Brandon.
    I don't find Brandon on Facebook. Is it the kitfox page?
    ChrisFlyer

  7. #17
    Senior Member
    Join Date
    Apr 2009
    Location
    Chisholm Mn
    Posts
    1,562

    Default Re: Disassembly cleaning wing tank KITFOX3

    Quote Originally Posted by ChrisKitfox View Post
    Excellent information !! Thank you. I would like to avoid the expense of tanks ordered on another continent ... I'm looking at that. thanks again
    I have used KBS fuel tank sealer several times and it seemed to work ok. I have wing rotisseries that I could rotate the wings in, so that was a big help to move the sloshing compound around. JImChuk

  8. #18
    Senior Member
    Join Date
    Dec 2017
    Location
    Mapleton,UT
    Posts
    1,224

    Default Re: Disassembly cleaning wing tank KITFOX3

    Sorry I don’t do Facebook but my brother says become friends with Brandon Petersen, and then use Facebook messenger.
    Dustin Dickerson

    Building 7ss STI x 2
    Oratex
    29" shock monster
    EP912STI 155hp
    Garmin
    N33TF......FLYING!
    N53TF......FLYING!

  9. #19

    Join Date
    Nov 2019
    Location
    MASSY
    Posts
    29

    Default Re: Disassembly cleaning wing tank KITFOX3

    Quote Originally Posted by avidflyer View Post
    I have used KBS fuel tank sealer several times and it seemed to work ok. I have wing rotisseries that I could rotate the wings in, so that was a big help to move the sloshing compound around. JImChuk
    Do you know if this product can be applied to the old layer of the original product?
    ChrisFlyer

  10. #20

    Join Date
    Nov 2019
    Location
    MASSY
    Posts
    29

    Default Re: Disassembly cleaning wing tank KITFOX3

    Quote Originally Posted by Shadowrider View Post
    Sorry I don’t do Facebook but my brother says become friends with Brandon Petersen, and then use Facebook messenger.
    Ok, thanks, I try that..
    ChrisFlyer

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •