Parts are starting to arrive and get installed into the aircraft

Power and ground distribution blocks installed. The Large "lugs" in the foreground to the right is Power (red) and Ground (black) in from the battery, these are toggled via the master switch and relay located near the battery.

The wires leading threw the fire wall go to the starter relay +, and engine block -


The distribution block (aft and left) are the bus bars: one for central ground - (the rearmost), and Power + which will be wired from the ACC via the Key switch (Not connected at this time)

Screen Shot 2019-11-21 at 2.41.27 PM.png



Wires from battery and relay. Green will go to "Master Switch" (Battery still needs to be replaced, so the battery box cover is not yet on, nor is the battery strapped in)
Screen Shot 2019-11-21 at 2.55.04 PM.png