Maybe you can made a paper template over the old one🤔
Maybe you can made a paper template over the old one🤔
Last edited by t j; 11-21-2019 at 03:08 PM.
Tom Jones
Classic 4 builder
Thank you.
Banged this out quickly,
Both headphone jacks and USB charge port, located behind the passenger seat (Easy access for the pilot)
Can't take credit for the idea, as I saw it on this forum first and thought to myself "Genius Idea" I always hated jacks in the dash, with wires everywhere.
Nothing is wire up yet, But I did temporarily connected the the USB port just to see it light up and say "Oooooh Awwwww"
Screen Shot 2019-11-21 at 6.23.16 PM.png
I also saw this on another post but just the headset jacks. USB port is a natural in the same location. Brilliant!
"Somebody said that carrier pilots were the best in the world, and they must be or there wouldn't be any of them left alive." Ernie Pyle
Brett Butler
Flying: N46KF, 1998 Model 5 Outback, 912ul 110hp, G3x with 2 axis a/p, Beringer wheels & brakes, SS7 firewall forward, NR prop, Custom paint
Not a whole lot to report. Drafted out the new dash.
Screen Shot 2019-11-27 at 9.00.13 PM.jpg
Tested out in cardboard. have to make some adjustments, unhappy I have to put the Airspeed indicator in the lower left side of the dash, but all the other steam gauges are just to long, and the ASI is the shortest
Screen Shot 2019-11-27 at 9.01.53 PM.png
Lots of new wire runs for.....well everything
oddly satisfying removing the door skins.
Screen Shot 2019-11-27 at 9.06.44 PM.png
Naked !
Screen Shot 2019-11-27 at 9.07.30 PM.jpg
Anyone need some door skins ?
Screen Shot 2019-11-27 at 9.08.32 PM.png
I seem to have less and less aircraft as time progresses.
Screen Shot 2019-11-27 at 9.12.37 PM.png
Two 1N5400 Diodes arrived in the mail so I installed them on the starter and battery coils.
Heres my way of connecting them: Remember the stripe on the diode goes towards the positive side. I used clear shrink wrap over the assembly.
Connected to the main battery coil
Screen Shot 2019-11-30 at 1.09.09 PM.png
Close up of the shrink wrap and ring terminal's, Sized so the diode can never be installed backwards
Screen Shot 2019-11-30 at 1.09.24 PM.png
Also some of my circuit breakers have arrived, maybe soon I can start wiring things up.
Screen Shot 2019-11-30 at 1.13.34 PM.png
I'm intrigued as to the purpose of the the diode?