Question Aerodynamic troubles during a test flight with a Kitfox3

[ChrisKitfox]

I'm not sure if the Kitfox 3 is the same, but a Kitfox 4 has different bolt holes on the front of the horizontal stabilizer for setting the incidence on the stabilizer. I would check that out as well if you have to use a lot of forward or rear stick to stay in level flight. Here is a picture of my Kitfox 4 project horizontal stabilizer forward mounting point. JImChuk

Thank you JImChuk for these iformations and the photo, I will check it.
I am looking for the manual of Kitfox3, where can I find these technical data?

Best regards