Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: CAD File for 4 Panel

  1. #1

    Join Date
    Oct 2017
    Location
    San Francisco
    Posts
    13

    Default CAD File for 4 Panel

    Does anyone have a CAD file of a blank model 4 panel they could send me? I'm looking to re-design my panel and would like to eventually send the design out for CNC routing.

    Thanks!

  2. #2

    Join Date
    Oct 2018
    Location
    Kitchener, Ontario
    Posts
    127

    Default Re: CAD File for 4 Panel

    Need one too ! Picking up a my new to me Model IV today.

  3. #3
    Senior Member 109JB's Avatar
    Join Date
    Mar 2019
    Location
    Morris, IL
    Posts
    484

    Default Re: CAD File for 4 Panel

    I have an autocad drawing I made based on dimensions from the builders manual that came with my IV. I haven't verified the dimensions yet and I can't post the drawing right now. Earliest I could would be this afternoon or evening but will do so then.
    John Brannen
    Morris, IL
    Sonerai IIL (Single Seat)
    Kitfox 3/4 1050 - Rotax 582 (Back Flying and sold)
    Kitfox IV 1050 - Rotax 582 (sold)
    Kitfox IV 1200 Speedster - Rotax 912 UL (project)
    Piper Twin Comanche (Sold)
    Glasair 1 FT (Waiting to start)

  4. #4
    Senior Member
    Join Date
    Dec 2017
    Location
    Canada
    Posts
    308

    Default Re: CAD File for 4 Panel

    I've got a bunch at https://grabcad.com/tracstarr-1/models that might help with design. I only have a model 6 panel, not sure if it's the same size.
    912 IS
    Airmaster Prop
    Garmin Stack
    C-FKLO

  5. #5
    Senior Member 109JB's Avatar
    Join Date
    Mar 2019
    Location
    Morris, IL
    Posts
    484

    Default Re: CAD File for 4 Panel

    For what its worth here is my dxf for the K IV panel. As I said, It is based on drawings in the plans book that came with my airplane but I haven't verified that this is correct. This was the sample panel layout from that plans.
    Attached Files Attached Files
    John Brannen
    Morris, IL
    Sonerai IIL (Single Seat)
    Kitfox 3/4 1050 - Rotax 582 (Back Flying and sold)
    Kitfox IV 1050 - Rotax 582 (sold)
    Kitfox IV 1200 Speedster - Rotax 912 UL (project)
    Piper Twin Comanche (Sold)
    Glasair 1 FT (Waiting to start)

  6. #6

    Join Date
    Oct 2017
    Location
    San Francisco
    Posts
    13

    Default Re: CAD File for 4 Panel

    Thanks John, this is great. I'll check out the dimensions and see if they line up with your dxf. Much appreciated

  7. #7

    Join Date
    Oct 2017
    Location
    San Francisco
    Posts
    13

    Default Re: CAD File for 4 Panel

    Quote Originally Posted by tracstarr View Post
    I've got a bunch at https://grabcad.com/tracstarr-1/models that might help with design. I only have a model 6 panel, not sure if it's the same size.
    Those cutouts look like they might be helpful, thanks!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •