Kitfox Aircraft Stick and Rudder Stein Air Grove Aircraft TCW Technologies Dynon Avionics AeroLED MGL Avionics Leading Edge Airfoils Desser EarthX Batteries Garmin G3X Touch
Results 1 to 7 of 7

Thread: 912 install pics

  1. #1
    rdooley79's Avatar
    Join Date
    Jan 2013
    Location
    lafayette, CO
    Posts
    92

    Default 912 install pics

    Show us your engines!

    I'm going to be installing a 912 on my KF4 and would like to see pics of other installations. I’m sure there are some really clean installs.

    thanks!
    Kitfox IV - 1200 (1994) #1830
    Rotax 912
    Grove Gear, Wheels, Brakes
    22" Desser Tundra Tires

  2. #2
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,327

    Default Re: 912 install pics

    get with them at kitfox, they know how to do it. the tank will need to be cut down, they can do that. the tubes for the water pump need to be reclocked. they can do that. the intakes need to be switched around so they now face out. the modules need to be removed and put on your motor mount, it's a good idea anyway. just some of the fun you will have.
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

  3. #3
    rdooley79's Avatar
    Join Date
    Jan 2013
    Location
    lafayette, CO
    Posts
    92

    Default Re: 912 install pics

    Could you take some pics of your engine install? It sounds like it's done nicely. Picture is worth a 1000 words!
    Sounds like there are a few tweaks that would be good to see so I know what a good install looks like.

    Thanks!
    Kitfox IV - 1200 (1994) #1830
    Rotax 912
    Grove Gear, Wheels, Brakes
    22" Desser Tundra Tires

  4. #4
    Senior Member Slyfox's Avatar
    Join Date
    Dec 2008
    Location
    felts field, spokane
    Posts
    1,327

    Default Re: 912 install pics

    next time I have the cowling off, I'll take a few. I got some new spark plugs to put in, so it shouldn't be too far out. I also did a booboo and pulled up too hard(yank and bank) and blew out my windscreen today. Oh crap. now I got that to do. but I ordered a preformed, don't want that again, this is the third time I've done it over about 10 years. Aren't these planes fun.
    steve
    slyfox
    model IV 1200-flying
    912uls
    IVO medium in-flight
    RV7A-flying
    IO-360
    constant speed prop

  5. #5
    rawheels's Avatar
    Join Date
    Jul 2010
    Location
    Westfield, IN
    Posts
    67

    Default Re: 912 install pics

    Did you ever find any useful information? I started the 912 install on my Model IV last weekend and was just searching the forums for the same info. The Kitfox instructions don't seem bad so far, but still would be great to have a build log, vlog, or just a photo album to reference as I go.

  6. #6
    Senior Member
    Join Date
    Feb 2011
    Location
    Dupuy,Qc
    Posts
    309

    Default Re: 912 install pics

    One is mine,the other is one i use for my installation
    Attached Images Attached Images

  7. #7
    Senior Member
    Join Date
    Feb 2011
    Location
    Dupuy,Qc
    Posts
    309

    Default Re: 912 install pics

    Mine was used 912, when i remove the manifold i broke two bolts 😢😩be carefull.
    you have to made a new bracket for ingnition box,cut the oil tank,re position the water tank.
    good luck

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •