Im considering mounting this behind the pilot side seat on a Al panel. The directions say mount within 1 degree of the longitudinal axis. I read this as the yaw direction. Then it says level withing 30 degrees. I believe the structure behind the seat is slightly tilted rearward so I want to make sure this would be an acceptable position considering the unit would be slightly out of level in pitch although square to the frame in all other axis.

I think this position would simplify wiring and routing of the air lines from the wings. In addition it is much more rigid than the panel and would make the garmin manual happy.

Also I would share the plate with my GPS20A. I dont read anything that tells me this would be a problem but Im putting it here as a check!

Does anyone see any issue with this?