Drop in replacement for Airheart brakes?
I have a kitfox model 1 with 8" Douglas wheels and Airheart brakes that I'm rebuilding. Even though the brakes aren't the best I was going to rebuild them and deal with it. I even looked the company up on line and it looked like there were spare parts to be had. That was last year. Their website now says that they have discontinued those brakes and parts/ kits etc.
So that begs the question, is there a drop in replacement? I'd rather not perform surgery on my landing gear to weld on new brackets if I don't have to.
Re: Drop in replacement for Airheart brakes?
Someone on the AviFoxFlyers site just put Black Max brakes on a Kitfox and they just require a new axle. The caliper on these keys to the axle. Might be worth a look.
Re: Drop in replacement for Airheart brakes?
Quote:
Originally Posted by
FoxbuilderWill
I have a kitfox model 1 with 8" Douglas wheels and Airheart brakes that I'm rebuilding. Even though the brakes aren't the best I was going to rebuild them and deal with it. I even looked the company up on line and it looked like there were spare parts to be had. That was last year. Their website now says that they have discontinued those brakes and parts/ kits etc.
So that begs the question, is there a drop in replacement? I'd rather not perform surgery on my landing gear to weld on new brackets if I don't have to.
I would imagine that rebuilding them would involve changing out O rings and pads. O rings shouldn't be an issue, just find the right size somewhere else and make sure they are compatable with the brake fluid you use. If the brake pads are in good shape, they will probably last a long time. I have about 600 hrs on the Matco ones on my Avid MK IV, and they still work. Unless the airheart pads are way softer, it may be quite a while before you need new ones. I see there is a phone # on the airheart site, maybe call them and see if you can get new pads. I have a complete set of them from a Kitfox 1 also, hubs, wheels, rotors and calipers but am not using them now. They did seem to do ok, not sure they stop any worse then the matcos. JImChuk
https://cometkartsales.com/Hurst-Airheart-Brakes/
Re: Drop in replacement for Airheart brakes?
Those Black Max brakes look nice. Kinda pricey though, I was hoping on just replacing calipers. We'll see.
Re: Drop in replacement for Airheart brakes?
Quote:
Originally Posted by
avidflyer
I would imagine that rebuilding them would involve changing out O rings and pads. O rings shouldn't be an issue, just find the right size somewhere else and make sure they are compatable with the brake fluid you use. If the brake pads are in good shape, they will probably last a long time. I have about 600 hrs on the Matco ones on my Avid MK IV, and they still work. Unless the airheart pads are way softer, it may be quite a while before you need new ones. I see there is a phone # on the airheart site, maybe call them and see if you can get new pads. I have a complete set of them from a Kitfox 1 also, hubs, wheels, rotors and calipers but am not using them now. They did seem to do ok, not sure they stop any worse then the matcos. JImChuk
https://cometkartsales.com/Hurst-Airheart-Brakes/
The plane only has 75 hrs on it so I doubt the pads have much wear. The previous owner said that the brakes would only hold to 75% power (rotax 532), so I'm building new brake pedals to get a little better mechanical advantage applying pressure. Given how important brakes are i probably just need to bite the bullet and buy some good ones.
Re: Drop in replacement for Airheart brakes?
Most Avid guys would be happy if their brakes held to 75% power. I would try to live with what you have, at least try them, maybe it will be ok. I did three landings in my Avid MK IV this evening, and barely used the brakes at all. Focus on other things for now. That's my story, and I'm sticking to it.... :-) JImChuk