I’m having trouble getting the fiberglass tube into the main spar. Any suggestions? Can I cut a slit on the wingtip fiberglass tube to make it easier to slide in?
Sent from my iPhone using Tapatalk
Printable View
I’m having trouble getting the fiberglass tube into the main spar. Any suggestions? Can I cut a slit on the wingtip fiberglass tube to make it easier to slide in?
Sent from my iPhone using Tapatalk
I don't know about splitting the tube but i had to do a lot of sanding with emery cloth to get mine to fit.
I am facing exactly the same problem now, I sanded a heck of the fiberglass tube on wingtips and now it fits with no problem. Now, the wall of the fiberglass tube became quite thin, so I decided to enforce it from inside with the fiberglass tape and epoxy raisin. That should give me a piece of mind that the structure is good enough.
This is just mine solution. maybe overkill, but make me feel better :)
Good luck
Robert
I'd say that was a good thing to do Robert.
Now I’m having another issue with the wingtips… when I install them everything fits great but I notice the trailing edge kinda droops down toward the end. Is that normal?
Sent from my iPhone using Tapatalk