Replacing the bungee gear with the cabane system and curious if any of you could shed light on the recommendation to have a 4 degree angle inward cant on the wheel. Thanks!
Printable View
Replacing the bungee gear with the cabane system and curious if any of you could shed light on the recommendation to have a 4 degree angle inward cant on the wheel. Thanks!
Are you talking camber or toe?
Toe should be 0 degrees. Camber will change on loading... In flight it will be out on the top, should be close to neutral when rolling on the ground.
Ralph
Thanks for your response. Perhaps the 4 degree camber setting is suggested to compensate when there is no load on the gear.