Re: Leaking airmaster prop
Hope that stops the messy prop issue Monty. I remember seeing a little grease on that prop after flying it.
Re: Leaking airmaster prop
Quote:
Originally Posted by
DesertFox4
Hope that stops the messy prop issue Monty. I remember seeing a little grease on that prop after flying it.
Yes it has become worse not better. Have to remove the spinner every 3-4 hours and clean it. At least I have found the answer now. Now we will see how Airmaster responds.
Re: Leaking airmaster prop
Is it the large o rings on the blade retention nuts going into the hub ?
Re: Leaking airmaster prop
Yes it is. The O Ring just under the large black retention ring.
Re: Leaking airmaster prop
Thanks for the heads up. Mine was leaking but I tightened to flange nuts thinking that was the issue. I’ll send them an email. I love that prop and they’ve been quick to answer.
Re: Leaking airmaster prop
Let me know if you get an answer. They have only answered one of my e-mails. My question is How can I get 3 of the larger O rings ((PO414-232)? and will Airmaster pay for the repair. If you find out please let me know and I will do the same.
Re: Leaking airmaster prop
I’d personally just be happy to get the correct O-ring size. You should be pulling and greasing your blades yearly anyway but I’ll let you know.
Re: Leaking airmaster prop
Re: Leaking airmaster prop
Monty,
I’ve been in contact with Airmaster. They are asking me to measure gaps on the hub. Did the new o-rings solve your issue and do you know of a stateside supplier?