HighWing
Senior Member

Hi Lowell,
Sorry to be a nuisance but I’m not sure I’ve sent info properly, the dimensions are L 8.5” H 3.5” width 1 5/8” pitch of connection,s 7.125 and height 0.75” the part No with Lockwood aviation is 886-033.

Thanks

Iain Donnelly
Ps the number G0504030 is stamped on the forward tail plane attachment point does it have any significance.

Hi Lowell,
I'm a new owner of a 1998 Kitfox Model IV Speedster and I found your message about the annual condition inspection checklist. Would you mind sharing it with me as well? I would greatly appreciate. Also if you have any other helpful documents like PDF copies of POH, How to Fly a Kitfox book, and/or operating check lists, that would be great! Thanks!

Brian

Dear Lowell,
I have nearly completed my Kitfox iv 1200 Classic round cowl, Arplast VP prop,but not happy with my oil cooler bracket suspended from the left hand gearbox tapped holes, I have read about your design, could you supply me with a pair? I am based in Scotland UK

I scanned to PDF the first 12 pages of the manual. Send an email and I will forward them to you.
Lowell

High Wing we started with a bare fuselage with a couple bags of parts for it. I started on the control column build and have the brackets for the rudder that the previous builder had mostly done. I have to finish them up and need to know some good routing information. Maybe an exploded view of the controls and rudders if u have any. Anything will help at this point. Tomorrow night I am going to bring template material to make a template for the floorboards, and see if I can get associated hardware together for the various components.

Hi Lowell
I am a new Kitfox owner based at KCCR. Wonder if we could exchange emails? Love to speak with you and meet local Kitfox owners.

Thanks
Alex
Adisessa@mac.com

Hi Lowell
I am a new Kitfox owner based at KCCR. Wonder if we could exchange emails? Love to speak with you and meet local Kitfox owners.

Thanks
Alex
Adisessa@mac.com

Lowell,
I am certainly up for that! I had to check with my family... that is my BIRTHDAY... I had to make sure that there was NO conflict ....we are good to go! I will call you this weekend!

This will be great...looking forward to seeing you again!
Grover

Thanks Lowell for the reply I am not ready for the bungees yet. I am recovering the aircraft right now thanks again it is a big help to know the size and length of the bungees
Bob

Hi Lowell I was looking in the forum and found the post about Bungys cords that you replyed to a member asking about the size and about building your own or buying them all together I am in the same boat I need bungys for an Avid 3 sorry about the spelling can you give me some advice?
thanks Bob